In the late 1950s, British Railways ordered five railbuses from Waggon und Maschinenbau, similar to the railbuses then common on German Federal Railways. These railbuses were intended for lightly used and loss-making branch lines. The hope was that the lower cost of running the railbus would allow the branch lines to break even and to avoid closure. Seventeen other railbuses from four other manufacturers (though of a similar specification) were also bought. Along with the German engines used in Western Region diesel-hydraulic locomotives, the W & M Railbuses were a rare foray by British Railways into employing overseas expertise [1] during modernisation from steam.
E79960 at Wirksworth on the EVR
| Information | |
|---|---|
| Number built: | 5 |
| Built: | 1959 |
| Builder: | Waggon und Maschinenbau |
| Engine: | Büssing 6-cyl horizontal diesel later replaced by AEC 220X |
| Power: | 150 hp (110 kW) |
Waggon und Maschinenbau adapted a fairly standard Deutsche Bundesbahn (DB) design for British Railways needs. The railbuses had four wheels, ride being "interesting" on the often poor quality track they were often used on! The railbuses had a single sliding door on each side. One interesting feature was the driving cabs only occupied half the width of the cabin. Passengers could thus sit at the front next to the cab. Three of the railbuses had their original Büssing engines replaced by AEC diesels.
E79960 at Ravenstor
The Railbuses were used on branch lines in the London Midland and Eastern Regions [2] especially in East Anglia. They indeed were successful in reducing running costs but the branch lines they were used on were still losing money and closed.
E79960 again, this time at Shottle
Due to the problem with spare parts for this small fleet and the closure of lines they could be used on the fleet was largely redundant by 1964 though continued in intermittent use until 1967 when they were withdrawn. Remarkably four of the five have survived into preservation.
The cab
Inside E79960, notice the cab only takes up half of the width
Another view of E79960 at Wirksworth
[1] Brian Haresnape, Diesel Multiple-Units: The First Generation (Ian Allan, 1985) p. 79
[2] Colin J Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 21